For prevention of human fastening errors and enhanced fastening management accuracy - Ideally suited for the assembly lines of vehicles and electrical equipment requiring reliable screw fastening - The controller receives signals from electric screwdrivers to provide highly reliable screw fastening control - Count Return Function: When a screw is loosened, a reverse signal output from the electric screwdriver reverses the count by one - The Count Correction Function does not count elevated screws or double fastening - Input voltage range from 100 to 240 V AC is acceptable in any part of the world (The screwdrivers to be used in combination with the counter require input power supplies that are written on the respective nameplate) - Link Connection Function: You can build up a simple sequential screw tightening system by connecting the DLR5040A-WE screw tightening counters in series without using any external controller such as a programmable controller - Driver Lock Function prevents unexpected start of screwdrivers - Compact and Lightweight (Compared with our conventional models decreased by 30 % in volume and by 38 % in mass) - SPC type screwdrivers for DLR5040A-WE are designed on the basis of established transformerless screwdrivers
Model : DLR5040A-WE Count : 1 - 99 Counting Method : Count-up / Count-down Count Correction Function : Count normal fastening only Self Adjustment Timer Setting : 0.01 to 0.99 sec. Work Detection Function : Yes (1 terminal) / No External Count Input : 2 terminals (PARTS A / PARTS B) Work Installation Timer Setting : 0 to 9.5 sec. OK Outout Timer Setting : 0 to 9.5 sec. NG Alarm : ON(1) / ON(2) / OFF OK Buzzer : ON(1) / ON(2) / ON(3) / OFF Count Return Function : ON / OFF NG Judge Timing : WORK SET / DRIVER ON Automatic / Manual OK Judge : AUTO / MANUAL Screwdriver Lock Function : ON / OFF Multiple Link : Up to 10 counters can be connected. External Input on Terminal Block(NPN) : SENSOR / RESET / LINK-IN / PARTS A / PARTS B External Output on Terminal Block(NPN) : OK / NG / LINK-OUT Parameter Memory : Parameters stored in internal nonvolatile memory Power Source : 100-240 V AC, 50/60 Hz Output Voltage : Same as Input Voltage External Dimensions (mm[inch]) : W100 x D120 x H60 [W3.94" x D4.72" x H2.36"] Mass (g[lbs]) : 470[1.04] Accessories : 2 m Cord with UL 3-prong plug. This product is for use outside Japan.
